ASTM A335 P22 Seamless Steel Pipes

ASTM A335 Pipe (ASME S/A335, Chorme-Moly) is a seamless ferritic Alloy-Steel Pipe for high temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding.  Sometimes referred to as ‘P Grade’, chome moly pipe is popular in P-Grades P5, P9, P11, P22, and P91.  The most common use of grades P11, P22, and P91 is in the power industry and petro-chemical plants,  Grades P5 and P9 are commonly used  in refineries.

ASTM A335 P22 Seamless Steel Pipes shall be suitable for bending, flanging, and similar forming operations, and for fusion welding.
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The range of ASTM A335 P22 Seamless Steel Pipes steel pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.
The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

Material & Manufacture

Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.

Heat Treatment

  • A / N+T
  • N+T / Q+T
  • N+T

Mechanical Tests Specified

  • Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
  • For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
  • For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.

Notes for Bend Test:

  • For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
  • Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
  • The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

Chemical Requirements of ASTM A335 P22

UNS Designa-tion K21590
Carbon 0.05-0.15
Manganese 0.30-0.60
P&S(max) 0.025
Silicon(max) 0.50
Chromium 1.90-2.60
Molybdenum 0.87-1.13
Others  —

Mechanical Properties  of ASTM A335 P22

Tensile strength, min, (MPa) 415
Yield strength, min, (MPa) 205
Elongation, min, (%), L/T 30/20

We are sincerely expecting to establish delightful cooperative relationship with  worldwide customers, and hoping to achieve win-win result.

Call us,or send us your email at any time for steel requirements please.
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s